2022 Kubota TR Series TR48
- Year 2022
- Make Kubota
- Model TR Series
2022 Kubota TR Series TR48
2022 Kubota TR Series TR48
Engineered for rental yards, contractors, and developers to dig trenches for water, electrical drainage and more. Available in two common sizes, 4’ and 5’ trenching depths, and features 4 different chain styles for each model—adaptable to clay, sand, and different degrees of compacted soil.
Features may include:
FrameHeavy frame construction stands up to everyday rugged use.
Front bearingsMachined and enclosed front bearings are protected against dirt and offer extended life.
Motor Type
Motor Type
Low flow (LF) & high flow (HF) motors
Operational
Operating Conditions
Chain speed (Depending on skid steer flow & pressure ratings): Low flow 227-366 fpm (69-112 m/min) | High flow: 221-373 fpm (67-114 m/min)
Hydraulics
Hydraulic Flow
motor requirements: Low flow 12-24 gpm (45.4-90.8 lpm) | High flow: 24-40 gpm (90.8-151.4 lpm)
Maximum Pressure
Hydraulic motor range: Low flow 2400-4500 psi (16.55-31.03 MPa) | High flow: 2000-3600 psi (13.79-24.82 MPa)
Dimensions
Overall Length
90.5” (2.30 m)
Length
Standard boom: 65.5" (1.66 m)
Depth, Maximum
Digging at 60 degrees: 4 ft (1.22 m)
Width
Frame w/step: 61.13" (1.55 m) | Trenching available: 6", 8" & 10" (15.2 cm, 20.3 cm, 25.4 cm)
Overall Width
64" (1.63 m)
Overall Height
34.1" (86.6 cm)
Auger Diameter
15.5" (39.4 cm) | clearance: 28.5" - 30.5" (72.4 cm - 77.5 cm)
Dimensions
Side shift travel: 22" (55.9 cm) | Side shift options Manual: Side shifts from center to 22” (55.9 cm) right of center | Hydraulic: Side shifts from center to 22” (55.9 cm) right of center
Capacities
Features
Trencher chain: 2.00” (5.1 cm) Pitch. 50,000 lb (22679.6 kg) tensile strength
Weights
Weight
Operating With 2 pitch cup chain and hydraulic side shift: 1282 lbs (581.5 kg)
Features
Construction Material
Frame: Heavy duty 5/16” (8 mm) thick w/ 3/4" (19 mm) reinforced bar around three sides the bottom lock pin slots